MCB (wood veneer) SUPPLIES

WOOD VENEER adhesives

GLUE FILM

Hot melt adhesive film

TAKE THE MESS AND STRESS OUT OF APPLYING VENEERS JUST IRON ON 

FROM AS LITTLE AS  £3.41 PER LINEAR Mt

IT'S A VERY COST EFFECTIVE WAY

OF FIXING WOOD VENEER

all inclusive prices! no hidden charges!

All prices shown in the drop down menu boxes on this page include delivery UK only

 

For delivery outside the uk OR ORDERS OVER 10 LINEAR MTS

PLEASE CONTACT US

0.66 METRE WIDE £4.50 PER LINEAR Mt (7.11 sq ft) +P&P

660mm hot melt Glue Film
                                                                                                         1545 mts in stock
                         BUTTON PRICES ARE ALL INCLUSIVE WITH P&P TO UK ONLY

 

Hot Hot melt adhesive film

0.50 metre wide

0.50 METRE WIDE  £3.41 PER LINEAR Mt (5.39 sq ft) +P&P

500mm hot melt Glue Film
                                                                                                        99 mts in stock
                            BUTTON PRICES ARE ALL INCLUSIVE WITH P&P TO UK ONLY

 

Hot melt adhesive film

 

HOT/MLT/160  0.16 metre wide

 £1.09 - 50% = £00.55 PER LINEAR Mt (1.77 sq ft) +P&P

splits occur in the release paper every 6-8ins throughout its length

Suitable for small projects or marquetry work

160mm hot melt Glue Film
                                                                                                        approx 100 mts in stock
BUTTON PRICES ARE ALL INCLUSIVE WITH P&P TO UK ONLY

please note for combined orders which include glue film in excess of 1 linear mt,

unless parcel length determines otherwise, glue film will be

rolled and dispached separately in cardboard tubes to avoid unnecessary creasing.

 

APPLICATION

Glue film is a hot melt adhesive film on a release paper backing, which is applied to the article you wish to veneer using a domestic iron on a medium setting.

When cold remove the backing paper from the glue filmthe surface is now ready to accept the wood veneer of ones choice. When applying the wood veneer it is advisable to use a sheet of brown wrapping paper between the wood veneer and the iron to avoid scorching, (Do not use the backing paper as this is waxed and will stain the wood veneer) at this point your iron should be turned up to it's maximum setting, i.e. 200º C. 

The setting time of the glue film is practically instant, depending on the temperature of the actual glue, i.e. if one follows the hot iron instantly with a cold heavy metal object (such as the face of a carpenter's jointing lump hammer or old fashioned smoothing iron) applying pressure as one goes, not only is the curing time reduced, but bubbles or wrinkling can be eliminated. Glue film is also very economical because even small pieces  can be patched together to cover large areas

At 660mm wide the current price of glue film is £4.50 per linear metre = 7.10 sq ft.

Not suitable for veneers over 0.9mm thick

traditional Pearl GLUE

In 500gm bags at £7.80

in 1kg bags at £13.95

Requires melting in a glue pot and applying by brush

useful when the applied wood veneer or timber is thicker than 0.6nmm